What is your impression of the S-CUBE chamber?

The S-CUBE chamber is impressive in its design. We’re happy with how quickly it was completed and how fast any issues were resolved. Overall, it’s a great achievement.

What would you say to someone who asked about us?

I’d mention your dedication to your projects and your quick problem-solving skills.

Thank you so much for your invaluable support regarding the Beam dump design and your prompt assistance in resolving the recent issue.

Your expertise and quick solutions have been instrumental in overcoming challenges and keeping our project on track.

I truly appreciate your dedication and willingness to assist whenever needed.

Looking forward to continued collaboration and success in our future endeavors.

MARVEL FUSION GmbH, Germany

What is your impression of our TVAC? And what would you say to someone who asked about us?

Thanks to your team for providing first-class facilities and expertise throughout the Thermal Vacuum (TVAC) testing of our Gigabit Ethernet Space Switch.

We highly appreciate your professional support and cooperation during the entire campaign.

Andreas Weiland, Project Engineer at IQ Technologies for Earth and Space GmbH

What is your impression of the S-CUBE TVAC chamber?

We like the chamber and the customization ability as well as the room that we have. Something that would have really helped would have been the conductive gaskets being provided with the chamber.

What would you say to someone who asked about us?

We would recommend the product.

University of Colorado, USA

What is your impression of the S-CUBE TVAC chamber?

The TVAC chamber meets all our expectations, it is ideal for the kind of tests we perform. In addition, the chamber requires easy installation and is user friendly.

What would you say to someone who asked about us?

Streicher TVAC chambers are perfect if you are looking for competitive prices, expertise and reactivity from the customer service.

Solar MEMS Technologies S.L., Spain

What is your impression of the vacuum chamber? / Wie ist Ihr Eindruck von der Vakuumkammer?

We haven’t had time yet to conduct a thorough inspection, but the chamber matches the drawings and seems solid. In particular, the aluminum lid, secured with just four screws, makes it easy to open, which is important in an experimental setting. / Bisher hatten wir noch keine Zeit für eine umfangreiche Abnahme, aber die Kammer entspricht den Zeichnungen und macht einen soliden Eindruck. Insbesondere das Aluminium-Lid mit nur vier Schrauben macht sie komfortabel zu öffnen, was in einem experimentellen Umfeld wichtig ist.

What would you say to someone who asked about us? / Was würden Sie jemandem sagen, der uns kennenlernen oder mehr über uns erfahren möchte?

Wir haben bereits zwei für unsere Verhältnisse große Vakuumkammern von STREICHER, die beide unseren Anforderungen entsprechen. / We already have two vacuum chambers from STREICHER that are large by our standards, and both meet our requirements.

Atominstitut TU Wien

What is your impression of the S-CUBE chamber?

The S-CUBE chamber is a robust piece of equipment with a precise way of manufacturing.

What would you say to someone who asked about us?

Supplier with fast and reliable communication.

5M s.r.o., Czech Republic

What is your impression of the S-CUBE TVAC chamber?

The system is compact, robust and modular, which would allow for future modifications or expansions.

The size and weight are also a plus, compared to some competitor’s solutions.

And finally, using the chamber is very easy.

What would you say to someone who asked about us?

The support has always been very reactive and friendly: Streicher teams worked to understand our requirement and provide the best solution possible

Telecom company, France

Customer Reviews

What was your impression of the S-Cube?

The S-Cube is a very versatile concept that is to my knowledge unique in the European market. It allows to adapt to rapidly changing requirements in a testing department. 

What problem you wanted to solve with our product?

We are supporting a wide variety of tests on both component and system level and need to support a wide range of sizes and test options. In order to stay compatible with changes in our product portfolio, the modular nature of the S-Cube is very attractive.

What would you say to someone who asked about us?

We really appreciated the professional and quick support of our request and a well though out product that can potentially adapt to a number of requirements. 

Dr. Jonnathan Meyer

Prototyping, Verification & Simulation at Mynaric Lasercom GmbH

What was your impression of the S-Cube?

It is a well engineered, and well fabricated piece of hardware. Everyone at our facility was impressed with it upon its arrival.

What problem you wanted to solve with our product?

We needed a chamber solution that allowed for future flexibility in our equipment design, the faceted design of the S- cube enabled this.

What would you say to someone who asked about us?

Emil and the team were incredibly professional. They took the time to really understand our requirements and generated a design that fit them.

My best regards to you and your team.  Thank You again for your support, I hope to be ordering a second chamber sometime in the coming year.

Unique, custom-made S-CUBE aluminum chamber for our partner in the USA

What was your impression of the S-Cube?

We were looking for a modular vacuum chamber for our research department. The S-Cube, being a modular system, seemed to offer exactly what we needed for our project. A high quality, good looking and easy-to-modify vacuum system. 

What problem you wanted to solve with our product?

Industrial machines for additive manufacturing are often designed to last for a long period of time. They are not meant to be modified. In research however, we are often faced with rapidly changing technologies that need to be implemented and tested in our test rigs . We need to be able to rapidly adapt our system without having to build a whole new machine. The modularity of the S-Cube offers exactly that. 

What would you say to someone who asked about us?

The experience we had during the meetings and the written exchange with the company was really positive. The response time was short and the interest in our project was high. It is a real pleasure to cooperate with such a company. 

Olivier Stoffels

PhD Student at Themengruppe Additive Fertigung

Institut für Werkzeugmaschinen und Betriebswissenschaften (iwb)

Technische Universität München (TUM)

What was your impression of the S-Cube?

In general, the S-cube system is very well designed and performs as advertised. As we said above it is the one that stands out in the lab !

What problem you wanted to solve with our product?

The goal was to be able to reach high vacuum inside the chamber to accommodate for a high intensity laser system. The chamber had to be isolated from the breadboard to minimize vibrations and the design had to ensure that frequent venting; opening and closing would not misalign the complex beam path inside.

As of today, the laser system has not yet be added. Given the performances of the vacuum we are not worried that the performances will be met.

What would you say to someone who asked about us?

We would highly recommend Streicher !


Matthieu VEINHARD, PhD
Ingénieur R&D | Research Engineer
www.linkedin.com/in/matthieuve/
ARDOP ENGINEERING
Cité de la Photonique
11 Avenue de la Canteranne bat. Pléione
33600 PESSAC
France

What was your impression of the delivered chamber?

We have an excellent impression. Not only because of the the final aspect of the chamber; but also by the quality of the packaging.. The chamber was perfectly delivered.

What problem you wanted to solve with our product?

We wanted to develop a chamber to perform laser irradiations in a controlled atmosphere.

What would you say to someone who asked about us?

We will recommend you without hesitation. We will highlight your help through all the design process, and you understanding with all of our requeriments.

INSTITUTO DE OPTICA. CSIC

What was your impression of the S-Cube?

Excellent.

What problem you wanted to solve with our product?

None yet.

What would you say to someone who asked about us?

Highly recommended.  The design process went smoothly, the team is highly professional and the chamber quality exceeded expectations.

Alameda Applied Sciences